Lubricants, Greases, Motor Oils distributed by Frank Morton for Texas Refinery Corporation 
Distributed By,
Frank Morton Associates
To Order, Contact Frank Morton:
800-865-1534
frank@grease4sale.com
Reading Massachusetts

PETRO-SOAP

  • ECONOMICAL
  • VERSATILE
  • EASY TO USE
  • NON-CORROSIVE
  • CLEANS WITH WATER
  • CLEANS WITH SOLVENT
 Petro-soap mixes with water or solvent to clean grease, oil and other petroleum soils.
PETRO-SOAP mixes with water or solvent to clean grease, oil and other petroleum soils.
Texas Refinery Corp.'s PETRO-SOAP is a unique blend of several cleaning agents. It mixes with water or solvent and has great penetrating cleaning power. It has a wide range of cleaning uses in industrial applications. Of course, it is excellent to remove dirt, grease, and oil from on-road and off-road vehicles.

 PETRO-SOAP Is Economical

PETRO-SOAP can be used with either water or a solvent such as kerosene or ASPHALT CLEANING SOLVENT. A little goes a long way toward solving cleaning problems, thus cutting cleaning costs. Since it can be used for so many purposes, it also saves on cleaner inventory costs.

PETRO-SOAP Is Versatile

PETRO-SOAP, when mixed with a solvent such as ASPHALT CLEANING SOLVENT, is extremely effective as a cold-soak cleaner. This solution can be used to clean automotive parts, stationary equipment, garage floors, and other soiled surfaces demanding special attention. Mixed with water, it makes a multi-purpose cleaner.

PETRO-SOAP Is Easy To Use

PETRO-SOAP can be applied in many ways . . . sprayed . . . mopped . . . brushed or wiped on soiled surfaces. Even when there is an unusually heavy concentration of grimy dirt deposits, PETRO-SOAP does the job. Just apply to soiled surface, let it set for awhile, then flush away with water. In some cases, better results are obtained by using naphtha, kerosene, or ASPHALT CLEANING SOLVENT to flush away the greasy residue.

PETRO-SOAP In Non-Corrosive

The high detergent agent of PETRO-SOAP quickly penetrates and softens grease, oil and other petroleum soils. Yet, it is freely rinsed away with water or solvent. It is non-corrosive to metals, under normal conditions, and has no damaging effect on paint when used according to directions.

PETRO-SOAP Cleans With Water

When mixed with water, PETRO-SOAP blends to an opaque solution and becomes a multi-purpose cleaner. It can be sprayed, mopped, brushed or wiped on - - then freely rinsed away with clean water. The most common cleaning ratio with water is 5 percent or 1 part PETRO-SOAP to 20 parts water.
 

PETRO-SOAP Cleans With Solvent

PRE-CLEANER Apply a mixture of 1 part PETRO-SOAP to 4 parts kerosene or ASPHALT CLEANING SOLVENT. Follow up this treatment by rinsing with either hot or cold water before alkaline cleaning. Loosens insoluble smuts, buffing compounds and ground-in greases not readily removed by alkaline cleaners.
CLEANING MOTORS, CHASSIS, PARTS Mix 1 part PETRO-SOAP with 4 or 5 parts kerosene or ASPHALT CLEANING SOLVENT. Apply. Let soak from 15 minutes to an hour, depending upon degree of grime encountered. Rinse. Saves on labor. High safety factor on aluminum alloys. Safe on most types of metal. Rinses freely.
REMOVING OIL AND TAR FROM EQUIPMENT  Mix 1 part PETRO-SOAP with 4 or 5 parts kerosene or ASPHALT CLEANING SOLVENT. Let soak from 15 minutes to an hour, depending upon degree of grime encountered. Rinse. Removes grimy residues without dismantling equipment.
DIESEL TRUCK CLEANING 1 part PETRO-SOAP to 5 parts kerosene or ASPHALT CLEANING SOLVENT. Apply. Let soak 15 to 30 minutes. Pressure water rinse. Effective, thorough cleaning.
CLEANING LOCOMOTIVE
RUNNING GEAR		 As a pre-cleaner, mix 1 part PETRO-SOAP to 5 parts kerosene or ASPHALT CLEANING SOLVENT and apply. Pressure rinse. Softens and emulsifies grease and dirt, permitting maximum removal with a pressure water rinse. PETRO-SOAP provides fast, effective maintenance cleaning with pressure equipment.
WASHING CONCRETE
FLOORS
(covered with ordinary dirt, dust and petroleum-soils, safe on painted floors)		 Mix 1 part PETRO-SOAP to 5 parts kerosene or ASPHALT CLEANING SOLVENT. Apply to floor. Let stand. Scrub and rinse off with pressure hose. Does a fast, thorough and inexpensive cleaning job on floors. Safe . . . yet powerful.
Kerosene or ASPHALT CLEANING SOLVENT are the most widely used solvents with PETRO-SOAP. However, it's also possible to obtain good results with diesel fuel, cleaning solvent or naphtha. Where necessary PETRO-SOAP can be cut as much as 1 to 20 parts with various diluents, depending upon type and amount of soil to be removed.

CAUTION: SOLVENT SYSTEMS ARE FLAMMABLE!