|
SUPER
BIG RED®
Is
Economical
SUPER BIG RED®'s
high concentration allows a reduction in the amount of cleaner needed for
a job . . . up to 50% less SUPER BIG RED® as
compared to ordinary cleaners. SUPER BIG RED®
is chemically engineered to remove
stubborn soil from practically any type surface, making it the most riteomical
cleaner you can use. Economy is further assured because the cleaning inventory
can be kept at a minimum.
SUPER BIG RED® stays
fresh and does not thicken. Use it down to and including the very last
concentrated drop!
SUPER BIG RED®Is
Powerful
Texas Refinery Corp.'s SUPER
BIG RED® is a highly alkaline cleaner with a great
deal of cleaning bite. In addition, it contains a special water soluble
solvent to cut grease and oil related stains. It is the ideal product for
the really tough cleaning jobs. SUPER BIG RED®
is so powerful it can be diluted with
up to 100 parts water!
SUPER BIG RED®Is
Easy To Use
There is no mess or fuss when using
Texas Refinery Corp.'s SUPER BIG RED®.
On most jobs, no mixing equipment is needed . . . simply add SUPER
BIG RED® to hot or cold water and the cleaning job
is half done! SUPER BIG RED® plus
water is easy to apply with mop, wiping cloth, brush, or spray. To remove
heavy deposits of oil and grease from concrete floors, or for cleaning
and degreasing industrial equipment, just dilute SUPER
BIG RED® with a solvent, such as kerosene.
SUPER BIG RED®
cleans quickly, with less effort required.
It freely rinses from surfaces, leaving essentially no sticky film or residue.
Mops and buckets are easy to clean after using with SUPER
BIG RED®. . . just rinse in cold water and they are
ready to store.
SUPER BIG RED®Is
Safe
SUPER BIG RED®
is a combination of highly effective
emulsifiers, solvents, and wetting agents in a safe, concentrated form.
Several important safeguards are a benefit when using SUPER
BIG RED®. In addition to being nonflammable and emitting
no toxic fumes, SUPER BIG RED®'s
surfactants are biodegradable. Many local governments require the cleaners
used by industries to be biodegradable - - this feature helps eliminate
foaming problems in sewage treatment plants. Texas Refinery Corp.'s SUPER
BIG RED® meets this need!
SUPER BIG RED®Authorized
By U.S.D.A.
SUPER BIG RED®
is authorized by the U.S. Department
of Agriculture for use under the USDA poultry, meat, rabbit, and egg products
inspection program as a general cleaner with "A1" rating. Before using
SUPER BIG RED®, all food products
and packaging materials must be removed from the room or carefully protected.
After using SUPER BIG RED®,
surfaces must be thoroughly rinsed with potable water.
SUPER BIG RED®Is
Versatile
SUPER BIG RED®
is formulated to remove stubborn soil
from most surfaces . . . from industrial equipment to floors to whitewall
tires. It can be used on metals, rubber, most paints and plastics; ideal
for more efficient removal of grease, oil, dirt, cutting oils, grimes,
syrups, and adhesives. It's especially effective in steam cleaning operations.
Continuous use of SUPER BIG RED® helps
prevent scaly substances from forming on steam cleaner coils. It joins
the steam power to cut dirt and grime from virtually any surface allowing
cleaner servicing of equipment. This provides longer equipment life, adding
up to substantial savings and considerable profits!
SUPER
BIG RED®
Product Code: #1730
| USES |
METHODS |
ADVANTAGES |
HAND WIPING
MACHINERY* |
Dilute 3 ozs. of SUPER
BIG RED® in a gallon of hot or cold water. Hand wipe or
spray on. Wipe off. |
Superior cleaning power
for pennies per gallon. Solution won't sour for a long period of time. |
| NEWSPAPER BUILDING MAINTENANCE* |
Mix 2 ozs. of SUPER BIG
RED® to 1 gallon of clear water. |
Readily emulsifies "ink
mist." Effectively cleans walls and floors. Fast, economical. |
| STEAM CLEANING MAINTENANCE
OF |
Mix 1 part SUPER BIG
RED® to 25 or more parts of cold water. Concentration depends
on stubbornness of soiled area. Add more SUPER BIG RED®
as needed. |
Safe on most types of
metal. Provides speedy wetting and penetrating action. |
FLOORS, WALLS,
BLACKBOARDS AND PAINTED
SURFACES* |
Dilute 1 oz. SUPER BIG
RED® to a gallon of clear, clean water (hot or cold). For
stripping most floor finishes, mix at a ratio of 1 part SUPER BIG RED®
to 5 parts water. Let solution set 10 minutes, but do not let it dry. Agitate
with stiff bristle brush or broom. Mop floor, then rinse with clean water
and allow floor to dry. |
Superior cleaning at
a minimal cost. |
| CAR WASHING* |
Pre-rinse by hosing down
with plain water. Dilute 1 oz. of SUPER BIG RED® to a gallon
of clear water. Use brush or swab. Hose rinse with clear water. |
No harm to expensive
car finish. Leaves bright, well-kept appearance. Virtually free rinsing. |
CONCRETE FLOORS WITH
HEAVY DEPOSITS
OF OIL AND GREASES (Driveways,
runways, loading docks) |
Mix 1 part SUPER BIG
RED® to 5 parts solvent.** (Note: Mix 1 gal. of solvent
and 1 gal. of SUPER BIG RED® thoroughly. Then add remaining
4 gal. of solvent.) Let soak. Agitate when necessary. Rinse with high pressure
hose. One gallon of solution covers approximately 150 sq. ft. |
Strong wetting, penetrating
and emulsifying action. Excellent rinsibility and water hardness control.
(When drain facilities are not available, remove excess solution with rubber-bladed
squeegee. Area may then be mopped with clear rinse water.) |
HEAVY-DUTY
EQUIPMENT WASHING |
Pre-rinse equipment to
be cleaned. Add 1 to 3 ozs. of SUPER BIG RED® to each gallon
of water, depending upon soiled condition of equipment. Use cold or warm
water. Apply mixture of SUPER BIG RED® and water to equipment.
Agitate extremely soiled areas with a brush or swab. Let solution soak
for 5 or 10 minutes. Then rinse equipment clean. |
No harm to most painted
surfaces. Dirt rinses away easily. An economical, effective cleaner. |
CLEANING AND
DEGREASING INDUSTRIAL
EQUIPMENT
(Pumps, engines, compressors)
TRUCK AND CAR MOTORS |
Dilute 1 part SUPER BIG
RED® to 5 parts solvent.** (Note: mix 1 gal. of solvent
and 1 gal. of SUPER BIG RED® thoroughly. Then add remaining
4 gals. of solvent.) Spray or brush solution over entire surface. Let soak
for 5 to 15 minutes. Rinse surface with water hose and use air hose, if
one is available, to blow off excess water. This solution is COMBUSTIBLE. |
Light Solvent odor. Safe
on most metal parts. Unequaled wetting and penetrating action. Controls
lime and scale deposits. Let very hot surfaces (exhaust system) cool down
before application - works extremely well on warm motor surfaces. While
cleaning is in process, do not operate equipment. Equipment is ready to
use immediately after cleaning. |
*May be irritating to
hands. Rubber gloves should be worn.
**Solvent, such as kerosene,
Stoddard solvent, or naphtha.
Handling Information:
For safe handling of the product, read the Material Safety Data Sheet (MSDS).
BIG
RED® is a registered trademark of Texas Refinery
Corp.
|
