• QUALITY BASE OILS
• SUPERIOR QUALITY ADDITIVES
• LONG LIFE
• PROTECTS SEALS AND OTHER PARTS
• EXTRA WIDE OPERATING TEMPERATURE RANGE
• VERSATILE

DEXRON III^® MERCON®

The base oils used in DEXRON® III - MERCON® have gone through several refining steps. First of all, there is the solvent extraction process that removes undesirable characteristics from the fluid. This will prevent sludge, gum, and varnish under heated conditions. The base stock then goes through the hydro-treating process which improves the oil's resistance to oxidation, as well as improving the oil's response to the superior quality additives used by Texas Refinery Corp. Finally the oils go through a dewaxing process making them suitable for cold temperatures. Because of their excellent resistance to oxidation and the beefed up additive package, extended drain intervals are often realized.

DEXRON III^® MERCON®

Texas Refinery Corp.'s DEXRON® III - MERCON® is additive treated with anti-wear, anti-leak, anti-foam, as well as being inhibited against rust, corrosion, and oxidation. It also contains a sheer stable viscosity index improver, a detergent dispersant package, and a pour depressant. In addition, the formula contains special friction modifiers. All of these superior quality additives work together to provide the finest in protection and service.

DEXRON III^® MERCON®

DEXRON® III - MERCON® is made with the finest anti-oxidation additives to retard sludge at elevated temperatures. Oxidation quickly kills many transmission fluids but this product provides long life.

Texas Refinery Corp.'s DEXRON® III - MERCON® has the ability to resist oxidation at temperatures exceeding 325° F. The product does not contribute to varnish or sludge on critical transmission components such as valve bodies, oil screens, governors or valves. This means the most severe operating conditions still receive desired shift characteristics because the fluid doesn't break down.

DEXRON III^® MERCON®

Three of the top quality additives used in the formulation of DEXRON® III - MERCON® are pour depressants, friction modifiers, and viscosity index improvers. The pour depressants alter the wax (found in all paraffin-based oils) and prevent the crystal wax growth, which could retard cold weather performance. As a result, the product flows at incredibly cold temperatures.

The friction modifier has been added for smooth positive shifts and compatibility with clutch-plate materials. Extra care has been taken to ensure compatibility with various automatic transmission components, such as plastic parts and elastomeric seals.

The viscosity index improvers used are extremely sheer stable. This, in addition to the highly refined base oils and the other superior additives, make this product top quality.

DEXRON III^® MERCON®

DEXRON® III - MERCON® has a variety of industrial uses. The very low pour point of -60° F. makes this an excellent cold weather hydraulic fluid. Industrial customers use the product year round in hydraulic systems because it handles temperature extremes of heat and cold very well.

DEXRON III^® MERCON®

In addition to being a very good all-weather hydraulic fluid, DEXRON® III - MERCON® has other uses. Industrial customers have found this product works well as a cold weather gear lubricant for those gear cases not requiring extreme pressure characteristics. In fact, this product has been used to lubricate all types of things in cold weather such as: chains and cables, bearings, compressors, spindles, shafts and journals as well as other general plant lubrication requirements.

Texas Refinery Corp.'s DEXRON® III - MERCON® is a multifunctional fluid for automatic and power-shift transmissions as well as industrial and mobile hydraulic systems. It is recommended for use as a fluid in automatic transmissions requiring General Motors DEXRON® III; Allison (C-4 12220390); Ford MERCON®, Ford M2C138CJ, M2C166H; as well as Caterpillar TO-2. It is also recommended for Sperry Vickers M-2950-S, I-286-S Denison HF-O, HF-1, HF-2, and Sunstrand hydraulic pump systems.