Lubricants, Greases, Motor Oils distributed by Frank Morton for Texas Refinery Corporation 
Distributed By,
Frank Morton Associates
To Order, Contact Frank Morton:
800-865-1534
frank@grease4sale.com 
Reading Massachusetts

SYNTEX 2700 SYNTHETIC 
GEAR LUBRICANT
  • EXTENDED DRAIN-INTERVAL CAPABILITIES
  • GOOD DEMULSIBILITY
  • WITHSTANDS HEAT
  • MADE FROM SYNTHETIC BASE STOCKS
  • ENSURES LUBRICATION FLOW
  • RESISTS FOAMING
 Syntex 2700 synthetic gear lubricant provides added lubrication protection in the toughest jobs.
SYNTEX 2700 added protection in the toughest jobs.
SYNTEX 2700 comes in two weights. The first is an SAE 75W/90 and the second is SAE 80W/140. The synthetic base stock has a very low pour point plus a high viscosity index. As a result these heavy duty extreme pressure gear lubricants offer superior low temperature performance as well as providing increased gear life due to extremely high film strength. When SAE 75W/90 is used in manual transmissions, shifting gears in sub-zero weather is much easier. If gears are heavily loaded, take a look at the 85 pound Timken OK Load for the SAE 80W/140.

SYNTEX 2700

Has Extended Drain-Interval Capabilities

SYNTEX 2700 has extended drain-interval capabilities, as opposed to petroleum-type gear lubricants. Since SYNTEX 2700 is treated with additives to prevent and control oxidation, rust, corrosion, and wear the gear components receive longer life and reduced wear. This means longer gear life and longer lubricant life. The high and low temperature performances of these products exceed those of conventional SAE 80W/90 and SAE 90 hypoid gear lubricants.

SYNTEX 2700

Has Good Demulsibility

SYNTEX 2700 has good demulsibility to promote rapid separation of water. The water usually comes from condensation caused by temperature variations in the gear boxes. There is no way to prevent moisture from entering but Texas Refinery Corp.'s SYNTEX 2700 promotes separation from the water.

SYNTEX 2700

Withstands Heat

SYNTEX 2700 stands heat better than most petroleum oils. This means the need for make-up oil is less with SYNTEX 2700 compared to most straight petroleum gear lubricants. If gears "freeze up" because of cooked gear lube from high operating temperatures, SYNTEX 2700 can help eliminate the problem.

SYNTEX 2700

Is Made From Synthetic Base Stocks

SYNTEX 2700 is made from synthetic base stocks giving it extremely low pour points and channel points. The product is used in all kinds of heavy duty equipment both on and off-road. SYNTEX 2700 is also used in many industrial applications particularly where either cold temperatures or hot temperatures make petroleum products unsatisfactory.

SYNTEX 2700

Ensures Lubrication Flow

SYNTEX 2700 ensures lubrication flow to pinion bearings, differential channels, and upper gears. The ability to protect gears and bearings in a wide range of loads, speeds, and temperatures make this product extremely useful.

SYNTEX 2700 is heavily loaded with high performance chemistry. Anti-rust, anti-corrosion, anti-foam, anti-oxidation, and extreme pressure anti-wear additives are all present in higher quantities than in conventional GL-5 petroleum gear lubricants.

SYNTEX 2700

Resists Foaming

SYNTEX 2700 fights a common problem (foaming) by using superior anti-foam additives. In addition, SYNTEX 2700 contains more anti-foam chemistry than conventional GL-5 petroleum gear lubricants. Foaming allows metal to metal contact, heat build-up, and eventually gear box failure. SYNTEX 2700 eliminates ordinary foaming problems and reduces foaming in the toughest applications or situations.