| Originally developed for the crown
of a drilling rig and truck chassis, 880 CROWN &
CHASSIS® GREASE has proved itself to be the backbone
of the Texas Refinery Corp. line of specialty lubricants. The "red grease
with gold flakes" is a favorite nationwide . . . from industry to trucking,
880
CROWN & CHASSIS® meets the demands of a multi-purpose
lubricant. |
880
CROWN & CHASSIS® GREASEHas Excellent
Extreme Pressure Qualities
Because of the purposes for which it
was originally developed, 880 CROWN & CHASSIS®
is especially effective for high pressure applications. For example,
the crown of a drilling rig is expected to support the weight of 2 to 3
miles of drill pipe, developing critical lubrication needs at contact areas.
With a Timken OK Load rating of 100 pounds minimum, (NLGI #2 only) 880
CROWN & CHASSIS® meets special lubrication needs,
providing the ultimate in extreme pressure protection. It's excellent for
use on ball joints and fifth wheels, which are constantly placed under
heavy loads.
880
CROWN & CHASSIS® GREASEIs Water
Resistant
Impervious to water, 880
CROWN & CHASSIS® can be used in many places where
a standard grade grease will wash off. It "stays put" in the presence of
moisture - an excellent grease on boat trailer wheels, which are in and
out of the water many times. This type of application requires the special
water-resistant qualities of 880 CROWN & CHASSIS®
to keep surfaces well lubricated, avoiding rusting, corroding, and
seizing.
In addition to marine-related uses,
880
CROWN & CHASSIS® is an exceptional lubricant
for use in the trenching and construction industry, standing up to even
the adverse conditions encountered with water pump bearings.
880
CROWN & CHASSIS® GREASEIs Adhesive
and Cohesive
The special "tackiness" additives in
880
CROWN & CHASSIS® make it a highly practical grease.
Its ability to stay put not only reduces grease consumption, but also provides
outstanding protection against metal-to-metal contact. It clings to metal,
sealing out dust, moisture, rust, and corrosion.
880
CROWN & CHASSIS® GREASEIs Safe
Authorized for use by the U.S. Department
of Agriculture, 880 CROWN & CHASSIS®
GREASE is acceptable for use in enclosed gear systems in such facilities
as federally inspected meat and poultry packing plants.
880
CROWN & CHASSIS® GREASEIs Versatile
An essential multi-purpose grease, 880
CROWN & CHASSIS® will safely handle most lubrication
needs, whether the surface to be lubricated turns, slides, or has an oscillating
motion. It can be used for all types of bearings - ball or roller, high
or low speed, sealed or opened.
Adding to its versatility, Texas Refinery
Corp. blended Polytetrafluoroethylene (PTFE) into 880
CROWN & CHASSIS®, adding extra protection by
providing additional low friction, anti-stick, and non-corrosive characteristics.
880 CROWN &
CHASSIS® is a very versatile grease. It may safely
be used for most applications. For operating temperatures of more than
270° F., use LITHPLEX, PARAGON 3000, MOLY LITHPLEX, HI-TEMP or MOLY
HI-TEMP. 880 CROWN & CHASSIS®
GREASE is available in four NLGI Grades (weights): #0, #00, #1,
and #2.
880
CROWN & CHASSIS® GREASEIs Stable
Specially treated to resist oxidation,
880
CROWN & CHASSIS® resists changes in consistency
and quality even when stored for long periods of time. It resists separation,
has controlled oil bleeding, and under most conditions will not crack,
harden, or become thin. |
