Lubricants, Greases, Motor Oils distributed by Frank Morton for Texas Refinery Corporation


	Distributed By, Frank Morton Associates

To Order, Contact Frank Morton:
800-865-1534
frank@grease4sale.com
Reading Massachusetts

**HI-TEMP GREASE**
NEVER MELTS EXTREME PRESSURE QUALITIES REDUCES CONSUMPTION RESISTS MOISTURE ADHESIVE VERSATILE	An ordinary grease did not provide adequate lubrication under heated conditions.

Proper lubrication with HI-TEMP reduces wear and friction, helping to increase the "life span" of lubricated parts. HI-TEMP, formulated to be used at elevated temperatures where soap base greases are not suitable, can save untold dollars in maintenance and replacement costs. Longer periods of uninterrupted production can provide increased savings.

HI-TEMP GREASE

Never Melts

HI-TEMP never melts - - even when subjected to high temperatures. HI-TEMP lubricates properly under elevated temperatures, as well as normal operating temperatures. As temperatures become excessive, the outside layers of oil in HI-TEMP begin to volatilize instead of the grease melting - - the inner layers hold intact, retaining their lubricating qualities. Under continuous high temperatures, periodic flushing with HI-TEMP helps keep bearings in good operating condition.

HI-TEMP GREASE

Has Extreme Pressure Qualities

Another item that makes HI-TEMP one of the best on the market is its extreme pressure capabilities! Many products on the market that withstand high heat do not measure up to the extreme pressure qualities of HI-TEMP. Testing procedures confirm HI-TEMP passing a full 55 pound Timken OK Load Test . . . additional protection to help reduce downtime to a minimum.

HI-TEMP GREASE

Reduces Consumption

Since HI-TEMP is a non-melting grease, it stays where you put it, preventing metal-to-metal contact during operation. Use of HI-TEMP helps eliminate galling, scoring or welding of bearing surface. Consumption of grease can be reduced with the use of HI-TEMP. . . the fact that it will "stay put" puts money back in the pocket!

HI-TEMP GREASE

Resists Moisture

Another benefit achieved by using HI-TEMP is the assurance of protection against moisture problems. HI-TEMP has good water-resistant qualities. It tends to seal itself in the bearings, thus sealing out damaging dirt and moisture. With the use of HI-TEMP, there's no worry of rust and corrosion wearing away metal parts and adding up repair bills unnecessarily!

HI-TEMP GREASE

Is Adhesive

HI-TEMP is a very adhesive grease, as compared to most greases on the market. Very adhesive - - meaning HI-TEMP clings tenaciously to metal surfaces providing an added film of protection. No "bare spots" will be encountered on metal surfaces with the use of HI-TEMP . . . proper film lubrication can be depended upon at all times. The adhesive property of HI-TEMP helps to reduce friction between metal parts, therefore reducing wear and repair bills!

HI-TEMP GREASE

Is Versatile

HI-TEMP is a high temperature grease which blends quality with versatility. In normal applications it is particularly well-suited to annular bearings. Where excessive heat exists, it does a superior job of lubricating ball, roller, and annular bearings. The list of HI-TEMP users ranges from farmers to earthmoving contractors . . . from brick and tile factories to industrial plants . . . from construction firms to refineries.